|
|
|
| EDGECAM Mill / Turn
|
|
Multi Task Machining
The use of tail stocks, steadies, sub spindles, twin turrets along with C Axis, CY Axis and B Axis are regular features on today's Multi-Task machine tools. In this collision rich environment, the programming of these machines is made simple and safe utilising Edgecam's turning and milling combinations in a single environment.
With the addition of 4 and 5 axis simultaneous milling, the simulation of these machine tools is made even easier.
Features at a glance:
One single machining environment
Full machine tool and toolpath simulation
Reduce component cycle time
Full collision checking on component parts
Reduce machine tool prove out by graphically simulating the tool path
Support for Twin Spindle, Twin Turret, Pickoff spindle, C, Y & B axis machining
Mill/Turn Simulation Edgecam offers a full kinematic Simulation package. All the cycles and movements are supported along with the full graphics of the machine, tails stocks and steadies meaning peace of mind as the part is fully tested before reaching the actual machine tool. The simulator being a very powerful tool in its own right offering full collision detection including many display options allowing the user full control over every aspect of the simulation. Feedback is given to the user show which commands are being simulated, this will also display which elements of the program may have caused issues. Comparison tools to show the part is machined as expected and correct before outputting to the machine tool.
4/5 Axis Simultaneous Mill Turn machines have many uses and allow much more flexibility and capabilities not offered from other machine configurations. With this in mind many of these have multi axis, upper turrets, lower turret, CYB and Sub Spindles.
Edgecam uses the latest cutting technologies and machine cycles and with this offers 4/5 Axis simultaneous milling options. For many industries this is becoming a must have option on a mill turn machine tool.
Edgecam offers a wide range of 4 and 5 axis Operations and Maximum control in its cycles, with the Advanced 5 Axis options allowing even greater potential.
With the addition of 4 and 5 axis simultaneous milling the simulation of these machine tools and fixtures is made easier, even for experienced manufacturing engineers.
Features include :
Axial Milling This mode allows the user to perform milling operations using the C axis with Rotary options allowing programming along the Z Axis.
Radial Milling Allows the user to machine features around the diameter giving flexibility to the user to turn the component, then create the mill features using driven tooling.
Y Axis Milling The Y axis milling capabilities allows the engineer more control over the toolpath creation and CNC code output. Edgecam supports plane switching where available on the machine tool and keeps the CNC code to a minimum by outputting arcs as required.
B Axis Head Support In a Mill Turn environment Edgecam fully supports the use of B Axis head work whether working on single spindle or sub spindle machines.
Edgecam for B Axis lathes offers the following main features:
B Axis positioning on upper turret allowing more precise and varied approaches to Mill/Turn parts giving the engineer a more flexible approach to programming complex components.
The B Axis can be programmed to tilt to any number of angles to allow the many milling options available to tackle any number of features such as Faces, Pockets and Holes.
B Axis machining on both the main and sub spindles maximises productivity allowing optimum machine performance. These features are also supported by our Full Kinematic Simulator with collision detection when using for 4/5 Axis Simultaneous work. This provides accurate feedback of the part being cut before release to the actual machine.
Upper/Lower Turret 4 Axis Turning The Four Axis turning option in Edgecam allows major advantages and functionality which is not always easily achieve at the machine control. Edgecam programming techniques allow you to use more than one turret at the same time in the mill turn programming environment. This means you can use two fixed cutting tools in the same cycle by using a number of Four Axis commands from the Cycles menu.
Edgecam supports the use of Upper and Lower Turret configurations and will support simulation of these including features such as:
Mirrored Turning Edgecam functionality will program turret movements which are mirrored about a plane on the Z axis and shows the toolpaths lying on the opposite side of the Z plane. The mirror cycle is a very powerful command that will allow various mirrored operation to be performed, such as, a right and left handed turning tool to action a Rough Turn and also Back Turn simultaneously. Turret synchronisation will also be include where required.
Balanced Turning Another of Edgecam's many features are balanced cycles. The Upper and Lower turrets work opposite each other about the Z axis. These cycles have an additional parameter called Z Lead. Using a value here instructs the currently active turret to cut in front of the other turret by the Z Lead distance allowing increased and improved metal removal. This cycle is automatically synchronised for optimum performance.
Synchronised Turrets A feature often needed by engineers is Synchronisation between Upper and Lower Turrets. Edgecam performs this function with ease. Use of wait commands simplifies the synchronisation of the Upper and Lower turrets when wanting to use these independently.
The synchronisation function is a major requirement in order to perform start and stop procedures with the upper and lower turrets and maximise efficiency in cycle. Edgecam tvisibly defines these operations in the manufacturing sequence and none productive time is clearly shown in the sequence time line. |
|
| Related Products |
|  iMachining
SolidCAM Inc.
SolidCAM''s iMachining revolutionary CAM Toolpath and Wizard, provide unbelievable cycle time savings and tool life extension, increasing dramatically ... | |  SHIPFLOW Design
FLOWTECH International AB
Potential flow, thin boundary layer and RANS solvers with the SHIPFLOW Design pre and post processor.
Modules
SHIPFLOW DESIGN
integrated pre and ... | |  Electrodes software module
Sescoi USA Inc.
The creation of electrodes is an important stage in the complex mold-making process. With WorkNC-CAD Hybrid Modeling electrode software, users achieve ... | |  WorkNC CAM
Sescoi USA Inc.
Automatic CAD CAM for 2 to 5 axis
WorkNC CAM software is the premier automatic CNC software for surface or solid models in mold, die and tooling businesses ... | |  Lantek Flex3d Tubes
Lantek Sheet Metal Solutions
Lantek Flex3d Tubes is a member of the Lantek Flex3d family of products for the design and cutting of tubes and profiles.
Lantek Flex3d Tubes is a ... |
|
|
|
|
主站蜘蛛池模板：
精品国产中文一级毛片在线看|
欧美国产综合欧美视频|
99热精品毛片全部国产无缓冲|
黎平县|
国产男女嘿咻视频在线观看
|
蒙自县|
日本男人精品一区二区|
熟女成人影片|
九九热视频在线免费观看|
av激情亚洲|
免费视频爱爱太爽了激情|
成人欧美一区在线视频在线观看
|
欧美丰满熟妇xxxx性|
无码日韩做暖暖大全免费不卡|
中文字幕精品久久久久人妻红杏Ⅰ|
超碰国产精品久久国产精品99
|
亚洲最大免费色情网|
国产精品高清一区二区三区|
五月丁香伊人|
人人澡超碰碰97碰碰碰|
综合欧美视频一区二区三区|
亚洲AV无码专区国产乱码DVD|
人妻系列无码专区无码中出|
天堂а√在线地址中文在线|
亚洲无码mv|
黄色99|
久久综合受美利坚合众国保护|
a片播放|
国产精品乱码高清在线观看|
日韩精品卡一卡二卡三卡四|
人人操超碰|
蜜臀av黑人亚洲精品|
亚洲中文字幕AV在天堂|
av午夜福利一片免费看|
精品人妻人人做人人爽|
精品综合久久久久久97|
先锋影音人妻啪啪VA资源网站|
怡春院网站|
午夜男女很黄的视频|
9久久伊人精品综合|
好吊视频在线一区二区三区|
