|
Husky launches HyPET® HPP5 Preform Moulding System
11/16/2013 |
|
|
- the next step in system level performance for high volume PET preform production
BOLTON, Ontario - Husky Injection Molding Systems today announced the launch of its next generation HyPET® HPP5 preform molding system. Building upon the proven technology of the HyPET® platform, enhancements have been made to HyPET® HPP5 that make it even more capable of delivering the lowest total cost to produce while providing exceptional preform quality. These enhancements allow for up to 12% productivity improvement over the previous generation system and are complemented by all new levels of production flexibility, tooling compatibility and the industry's first integrated solution for extended mold life.
"Husky is committed to offering customers the best return on their investments through continuous innovation. When developing our new HyPET® HPP5 system, we listened to what our customers were telling us and with that feedback in mind designed a system that would help them run a more competitive injection molding operation," said Robert Domodossola, Husky's Vice President of Engineering and Business Development. "HyPET® HPP5 is the result of meaningful technology refinements to many areas that combined offer the most complete and integrated injection molding system for preform manufacturing on the market today."
Cross-generation mold compatibility
Designed to satisfy the needs of customers with a large installed base of tooling, HyPET® HPP5 offers customers the ability to utilize molds from previous generation products. Simplified cross-generation mold compatibility packages make upgrading equipment easier and help to preserve valuable floor space, while allowing customers to manufacture a complete product range. In addition, a combination of technical solutions offer enhanced production flexibility, which makes the replacement of legacy assets more viable.
Improved maintenance and extended mold life
A key enhancement to the HyPET® HPP5 system is the addition of the industry's first integrated solution for extended mold life, which helps to significantly improve performance and reduce maintenance costs. Benefits include a 60% increase between required mold maintenance intervals and extended tool life up to 10 million cycles without excessive wear or flash. Sensors ensure correct mold installation and detect misalignment between mold halves during operation. If misalignment is detected, sensors signal the operator through the Polaris™ HMI and provide specific instructions to correct misalignment, allowing the vertical position of the cold half to be adjusted and the mold aligned without the use of a crane. Additional features to reduce maintenance and machine downtime include an improved procedure to align neck rings to the cavity plate and specialized anti-wear coatings that extend greasing intervals up to 120,000 cycles.
Performance and energy improvements
The CoolPik® dehumidification unit, standard on HyPET® HPP5 systems, has also been improved by replacing the desiccant wheel dehumidification and air to water heat exchanger with refrigerator combined cooling and dehumidification. The HyPET® HPP5 offers air cooling and dehumidification efficiency improvements that can yield a more than 20% reduction in energy consumption. For carbonated soft drink preform applications, when combined with better melt control and other advantages, a cycle time improvement of up to 3% can be achieved.
Improved ease of use
The latest HyPET® HPP5 is much more sophisticated, with software and hardware that have been designed to work together seamlessly. The system has undergone considerable improvements to streamline operation, including upgrades to increase automation and simplify controls. The Polaris™ HMI has been redesigned with a 19-inch full color LCD display, more intuitive layout for easier access to screens, and the ability to monitor and control auxiliaries. Operating software and menu screens have also been enhanced to simplify start-up and logic has been provided to act on the auxiliary feedback and alarms during operation. The Altanium™ temperature controller is now also fully integrated and can be controlled using the Polaris™ HMI. Further simplifying start-up and improving ease of use is Husky's patented intelligent Mold ID technology, which provides information on mold maintenance, process set-up and operation for each start-up.
|
|
|
|
|
|
主站蜘蛛池模板：
青娱乐导航|
日本亚洲一区二区精品久久|
狼综合网|
久久久久亚洲AV成人网人人软件|
亚洲人妻久久|
蜜臀91精品高清国产福利|
国产亚洲一区二区三区在线|
国产72av国片精品jk制服|
久草超碰|
久久精品人妻无码一区二区三|
国产美熟女乱又伦av果冻传媒|
国产偷国产偷亚洲清高网站|
亚洲欧美自偷自拍视频图片|
午夜福利视频网站|
国产日韩视频在线观看|
女人张开腿无遮无挡视频免费|
91精品国产自产在线蜜臀|
制度丝袜诱惑av|
国产观看免费高清视频|
久9热免费精品视频在线观看
|
99久久精品国产自免费|
日本一卡二卡新区乱码 工|
日韩深夜免费在线观看|
男女啪啪网站|
人妻少妇久久|
人妻无码中文字幕免费视频蜜桃|
韩国av无码|
欧美在线观看一区二区|
尤物在线观看国产精品|
欧美日韩国产一区二区三区欧|
日本一区午夜艳熟免费|
你懂的国产在线|
国产高跟鞋丝袜在线播放|
无码专区中文字幕视频在线|
免费超爽大片黄|
在线啊v中文字幕|
人妻日日爽|
热播人兽-高清人兽大全-免费人兽在线观看-第1页-成人AV
|
AV免费网站|
成人国产精品日本在线观看|
国产色婷婷五月精品综合在线|
