Home > Oil, Mining & Construction Machinery > Drilling & Boring Machine > News



Luoyang Zhili Industry Co.,Ltd


Company \| News \| Products \| Contact Us

Atlas Copco launches compact rock bolting rig - Boltec S

5/29/2013

Atlas Copco is launching a new, compact rig for rock bolting in small to medium sized tunnels and drifts. The rig, called Boltec S, is fully mechanized and can operate in drifts as low as 2.8 meters and up to 7.5 meters.Atlas Copco is launching a new, compact rig for rock bolting in small to medium sized tunnels and drifts. The rig, called Boltec S, is fully mechanized and can operate in drifts as low as 2.8 meters and up to 7.5 meters.

"With this launch, Atlas Copco is filling a gap in the market in terms of small, fully mechanized rock bolting rigs," says David Shellhammer, division President for Atlas Copco Underground Rock Excavation. "We're glad to be able to offer a rock bolting rig that fits the smallest tunnels and mines. No-one should ever have to work beneath unsupported ground, and with this rig you will be able to eliminate manual bolting which, in many cases, has previously been the only option in this segment."

"The low operating height is due to the short dead length on the feed and the low cabin height," explains Paul A O'Neill, Product Manager at Atlas Copco. "The Boltec S has a dead length of only 1.1 meters, which is the best in its class."

The Boltec S can be equipped with the new, 14 kW COP 1435 rock drill offering up to 30% faster drilling than the lighter 11 kW COP 1132. At the same time, both rock drills are built from the same, short housing parts, giving maximum room for installing longer bolts.

Another feature is a new operator panel with only two multifunctional levers that control the whole operation from drilling to bolting. A new resin injection steering system, which is also controlled from the operator panel, makes the loading of resin cartridges into the pre-drilled hole a lot easier since it is not necessary to move the whole bolting unit.

The bolting unit is mounted in a forward facing position. This makes it easier to install bolts in both the left and right hand corners, and also allows for face bolting when necessary. The bolt carousel can be loaded in a vertical position, resulting in a much faster re-load time and a better working environment for the operator.

Read more on: www.atlascopco.com/BoltecS

Atlas Copco launches the Explorac 100 reverse circulation drilling rig 5/15/2013

TEX 03PS: New high-frequency chipping hammer from Atlas Copco 4/24/2013

Bauma 2013: Lightest fully vibro-reduced handheld hydraulic pick hammer 2/20/2013

Bauma 2013: SMART solution - plug and poke 2/15/2013

New C-Series completes Atlas Copco´s hydraulic breaker offering for the Chinese market 11/27/2012

Belden Supplies Hirschmann Brand Optical Communications Technology for Herrenknecht Tunnel Boring Machines 11/8/2012

Atlas Copco previews new Boomer upgrades at MINExpo, Las Vegas 9/27/2012

A world first: Atlas Copco SB 702, the only 700 kg hydraulic breaker with a solid body 9/13/2012

Atlas Copco to launch underground 'app' 4/20/2012

Drilling & Boring Machine Exhibitions
	Trenchless Asia 2026 6/10/2026 - 6/11/2026 Bangkok, Thailand
	North American Tunneling Conference 2026 6/15/2026 - 6/18/2026 Los Angeles CA, United States
	DFI SuperPile 2026 6/24/2026 - 6/26/2026 New Orleans LA, United States
	DFI's S3: Slopes, Support and Stabilization 2026 8/11/2026 - 8/13/2026 Charlotte NC, United States
	CAVING 2026 8/18/2026 - 8/20/2026 Ulaanbaatar, Mongolia
More Trade Shows