|
Treffert starts operation of three new ZSK twin screw extruders
7/19/2011 |
|
|
Looking back on ten successful years with Coperion
Stuttgart, June 2011. - Only a few days ago, Treffert GmbH & Co. KG, Bingen/Germany, received three new ZSK MEGAcompounders with 26 mm screw diameter from Coperion GmbH, Stuttgart/Germany, formerly Werner & Pfleiderer, and has already commissioned them. With these latest additions to its production set-up, Treffert now operates a total of 22 ZSK twin screw extruders for the production of masterbatch and special compounds. The three new extruders will be used for the production of high-grade pigment masterbatches for the plastics processing industry. Two of the ZSK 26 Mc extruders are destined for the pre-mix process. The third one is equipped with a ZS-B side-feeder and several gravimetric feeders for the split-feed process.
The success story began ten years ago, when Treffert developed a new strategy for modernizing and standardizing its masterbatch and compound production at its two factories in Bingen/Germany and Ste-Marie-aux-Chenes/France. The baseline of the strategy was the concrete requirement for a compounding technology that would continue to be valid for years to come. This meant that the extruders would not only have to cope with all possible processing requirements but also be flexible enough for present and future compounding applications. The targets of Treffert's strategy are quality leadership both in compounds and in additive and pigment masterbatches and market leadership as the most innovative supplier.
In the beginning, Coperion provided a ZSK rental extruder, thus enabling Treffert to thoroughly test its performance and behaviour with all relevant formulations and output rates. Peter von Hoffmann, General Manager Business Unit Compounding Systems Engineering Plastics & Special Applications, sums up the results as follows: "The ZSK twin screw extruder met Treffert's criteria in all the predefined situations. This encouraging result marked the beginning of the longstanding cooperation between our two companies."
As a specialist in the production of additive and pigment masterbatches and special compounds, Treffert must also be able to produce small and medium-sized batches economically. This requires a compounding technology with a high degree of availability and efficiency. In this regard the ZSK extruders offer specific advantages: the closely intermeshing twin screws are self-cleaning and there are no stagnant zones in the entire process section, which means that little cleaning is required when changing over from one colour to another and changeover times are therefore very fast. The excellent self-cleaning behaviour of the system is particularly important in the case of compounds destined for medical technology, an application where cleanliness and product purity have the highest priority.
The process section of the ZSK is easily accessible for maintenance and cleaning purposes. Quick-release features permit easy removal of the die head and the twin screws - only two retaining bolts have to be unscrewed. Thus it is possible for Treffert to process formulations requiring a different screw configuration with only a negligible changeover time. A further saving in time is achieved by preheating the replacement die head to operating temperature prior to installation. The removed machine parts are cleaned separately, i.e. independently of extruder operation.
One of the most important features of the ZSK extruders is the constant screw diameter ratio of Do : Di = 1.55, where 'Do' is the outer diameter and 'Di' the inner diameter of the screw. The constant screw diameter ratio permits a reliable scale-up of production parameters between all extruder sizes installed in Treffert's production facilities - from ZSK 26 to ZSK 50. But that is not all: uniform production conditions - and hence product quality - are ensured at both production sites, while the scale-up of production parameters makes for greater flexibility when it comes to selecting a machine for a particular production batch.
A further point in the ZSK's favour is the modular design of the process section, which facilitates the individual configuration to the specific requirements of every application. In the production of masterbatch with highly abrasive ingredients, wear resistance is considerably improved by the fitting of oval barrel liners manufactured from Supermet 60 PLUS. This measure guarantees the high quality of Treffert's products over the long term.
The overall modular design of the ZSK enables Treffert to configure the extruder to new formulations or changes in process-related requirements. A typical example, triggered by the ever growing need to sustain natural resources, is the use of plastics based on renewable raw materials. Executive partner Heinrich Treffert says: "Our particular priority in the future will be to develop our competence in the production of materbatches and compounds based on renewable raw materials. ZSK twin screw extruders are perfect for this area of application."
With the continuous further development of compounding technology and its process engineering know-how, Coperion has proven to be the perfect partner for Treffert - not only during the past ten years but also for many years to come. "An innovative masterbatch producer needs an innovative partner who can supply the necessary machine technology," says Heinrich Treffert, evaluating the essence of a successful cooperation from both sides.
|
|
|
|
|
|
主站蜘蛛池模板：
成人免费av高清在线|
人妻精品无码一区二区三区|
京东热av在线|
志丹县|
污污污污污污WWW网站免费|
校园春色欧美激情|
亚洲中文字幕日产无码2020
|
亚洲成av人片色午夜乱码|
欧美大胆老熟妇乱子伦视频|
亚洲小视频|
丰满人妻一区二区三区无码AV|
色娜娜无码激情在线|
中国一区二区视频|
少妇被黑人到高潮喷出白浆|
久久久久久久久久久久中文字幕|
免费的很黄很污的视频|
全球熟女AV最大导航|
日韩av一区二区三区|
午夜福利看片在线观看|
亚洲综合伊人久久大杳蕉|
久久天天躁狠狠躁夜夜躁2o2o|
日本熟妇XXXX潮喷视频|
99无码人妻一区二区三区免费|
久草福利资源站|
无码av永久免费大全|
无码激情亚洲一区|
日韩AV一卡二卡三卡|
白白青青视频在线免费观看|
国产丰满乱子伦无码专区|
亚洲中文字幕国产综合|
亚洲日韩乱码中文无码蜜桃臀网站
|
欧美福利在线|
一个人看的WWW免费视频在线观看|
欧美色丁香|
蜜桃久久精品成人无码AV|
一本到在线dvd国产观看不卡|
韩国日本国产亚洲自拍|
成人精品色一区二区三区|
亚洲无码人妻|
国产精品成人网址在线观看
|
亚洲AV伊人久久综合密臀性色|
