Home > Cutting Tools > Milling Cutter > News

MAG's Cyclo Cut Max-Flute high performance end mills support titanium roughing

9/19/2011

MAG's Cyclo Cut Max-Flute high performance end mills support titanium roughing with a 16-flute design capable of high removal rates at low torque.

The high density end mills run at 2,037 rpm and 5.9 m/min to achieve removal rates of up to 130 cm3/min with only 25 ft lb of torque and 96.7 kW.

When cutting titanium, 60 to 70% of the heat generated is normally transferred to the tool, dramatically reducing tool life. Max-Flute tools use shallow, radial widths of cut, which transfer less heat to the cutting tool and allow higher surface speeds for roughing titanium, Inconel and other high temperature alloys that have traditionally required high torque at low rpm to achieve desired removal rates.

Used in conjunction with TrueMill software, Max-Flute end mills maintain a constant angle of engagement, making the radial cuts more consistent throughout the cutter path, increasing material removal rates and decreasing cycle times, while extending tool life.

"The current approach to high speed machining involves taking very light cuts," said Dan Cooper, Cyclo Cut product manager for MAG Regional Services. "The Max-Flute/TrueMill approach enables the machine to make heavier cuts at high speeds, and by using the maximum flute density available, maximum feed rates are achievable."

Max-Flute tools are designed with a differential pitch on the tool flutes to break up harmonics and reduce chatter. "Titanium is very prone to chatter, which affects part quality, and can cause unpredictable tool failure," adds Mr Cooper. "By using extremely high feed rates and light radial cuts, we can remove a lot of material with very little risk of scrapping parts."

Related News

Milling Cutter Exhibitions
	Moulding Expo Stuttgart 2027 Stuttgart, Germany
	Elmia Machine Tools 2028 Jonkoping, Sweden
	Elmia 3D 2028 Jonkoping, Sweden
More Trade Shows