|
Rapid unveils next-generation shredders for plastics - The Raptor Series
9/8/2016 |
|
|
Bredaryd, Sweden - September 6, 2016 - Size-reduction technology specialist Rapid Granulator is introducing a new family of shredders for plastics: The Raptor Series. These modularly designed units feature a world-first with their "open-hearted" design. Other notable design features include a unique cutting system, tilt-back hopper, and design for integrated granulation. The Raptor Series has been designed using the more than 70 years of accumulated knowledge in size reduction, in order to maximize productivity with a minimum cost of ownership. During K 2016, the Raptor Series is on display at the Rapid Granulator booth (Hall 9 - stand E19).
"The Raptor Series is a shredder and granulator hybrid with the shredder's heavy-duty cutting technology combined with granulator features such as Rapid's "open hearted" design that makes it super-easy to operate, service and clean," says Rapid Global Sales and Marketing Director Bengt Rimark. "The Raptor Series has been developed with 100% focus on every single detail that is of importance for plastic processors, in order to create simplicity and a minimum cost of ownership. As we develop and manufacture both granulators and shredders, we make sure that the machines are tailored for each other and that we can provide complete recycling systems, direct from Rapid."
The Rapid "open hearted" design of the Raptor enables quick and direct access to the shredder rotor and cutter chamber, drastically simplifying the cleaning and service process. The front door, hinged on the side, provides unrestricted access to the rotor and to the screen, which is mounted in the door. Once the front door is open, the shredder hopper mounted on a rear hinge can be tilted back.
Rapid offers 36 base configurations of the Raptor in order to handle various customer applications. The modular systems feature two diameters and two widths (31.5" and 53"/800 mm and 1.350 mm). There are two system designs for pushing material into the rotor - FlexiPUSH and PowerPUSH. The PowerPUSH is available with an extended pusher length (PowerPUSH-XT); there are also three different cutting systems: Quad Cut, Claw, and Power Wedge.
The low cost of ownership of the new Raptor Series is accomplished through the ease and speed with which it can be cleaned and maintained. The machine can be in a completely open position in less than one minute after it has stopped running. Once the machine is open, all fasteners are accessible from the outside using air driven tools. The access made possible by the "open hearted" designs makes any contamination immediately visible.
The tilting hopper opens with an electrically operated jack, while the screen and granule bin can be handled by a single operator. The unique screen cradle design does not require the removal of bolts in order to remove the screen, and the granule bin slides out easily. The same tool is used to unlock the front door and to rotate the rotor. As an option, a light can be fitted to provide extra illumination.
The FlexiPUSH is a pneumatically driven pusher and is intended for handling basic applications, including lumpy materials. It can handle large products such as a 1200-L IBC (Intermediate Bulk Container) for example. The hydraulically powered PowerPUSH maximizes output for shredding sheet and film. The cutting chamber features a textured floor to reduce the risk of material adhering or finding its way under the pusher and is offset by 5 degrees to enable liquids to drain away.
The unique QuadCUT cutting system for general plastic waste features a solid knife that allows the full use of all four cutting edges. The cutting system is extremely durable and has a rock solid clamping system attaching the knife to the rotor. The knives are supported by a sacrificial washer in order to protect the rotor should non-plastic material accidently enter the cutting chamber.
The base of the Raptor Shedder series is also equipped with the Rapid MCB feature (Mineral Composite Base) which absorbs stress and vibration during operation and gives the shredder a very solid footing and a low center of gravity.
The Raptors can also be configured in the Rapid DUO concept, with a floor-standing granulator located directly beneath the output of the shredder. |
|
Related Exhibition:
|
|
|
 |
|
K 2016 International Trade Fair
|
International Trade Fair for Plastics and Rubber
10/19/2016 - 10/26/2016
Venue: Messe Dusseldorf Fairgrounds, Dusseldorf, Germany
|
|
|
|
|
|
|
主站蜘蛛池模板：
久久久精品94久久精品|
秘色aⅴ一区二区三区|
国产成人精品中文字幕|
欧美整片sss|
国产精品小蝌蚪福利|
色偷拍亚洲偷自拍一区|
久久99日韩国产精品久久99|
久久精品第一国产久精国产宅男66
|
久久婷婷五月综合色和啪|
精品国产一区二区三区av色诱|
色婷婷av一区二区三区浪潮|
中文毛片无遮挡高潮免费|
国产精品中文字幕第一区|
久久精品国产99国产精品导航|
日韩在线视频第一页|
av高清无码在线观看|
国模少妇无码一区二区三区|
日本熟妇hdsex视频|
国产成人福利在线视老湿机|
99久久久无码国产精品免费
|
97精品伊人久久大香线蕉APP|
精品无人乱码一区二区三区的优势
|
国内不卡不区二区三区|
一个色综合亚洲热色综合|
在线无码av一区二区三区|
亚洲精品综合av天堂|
丝袜熟女露出|
日韩秘 无码一区二区三区
|
亚洲成人精品综合在线|
日韩精品一二区在线观看|
高跟熟女中文字幕在线亚洲|
国模小黎337P|
日韩av免费在线天堂|
欧美精品人人做人人爱视频|
9久久精品|
一区二区三区毛VⅤ|
无码专区国产精品一区|
亚洲综合一区国产精品|
日韩一区二区av|
中出极品日本女|
久久国产精品久久精品|
