|
EcoCVac by Dürr Ecoclean - innovative dry cleaning without compressed air
7/29/2015 |
|
|
Intermediate cleaning of powertrain parts with over 50% energy savings and high process reliability
Monschau/Germany, July 2015 - Machined powertrain components undergo intermediate cleaning to safeguard the quality of subsequent process steps. This is typically done by means of compressed air, which must be generated at a high expense of energy. With their new EcoCVac, Dürr Ecoclean offers an effective dry cleaning system that eliminates the need for compressed air. Apart from delivering enhanced process reliability, the system can provide energy savings of more than 50 percent. As maintenance of the working chamber is minimized, it also improves the machine availability.
Modern engine and transmission manufacturing lines are designed for maximum productivity and economic efficiency. Accordingly, any cause of interference with a downstream process must be eliminated. This makes it mandatory that engine and transmission parts such as, e.g., cylinder heads, engine blocks and transmission housings undergo cleaning operations between machining steps. Such intermediate cleaning is often performed by cleaning machines using compressed air. A benefit of this method is that the part is cleaned 'dry'. On the downside, however, generating the compressed air supply is very costly. Moreover, the chips and machining fluid residue adhering to the product are merely blown off - i.e., allowed to spread around in the work chamber, which will therefore become contaminated quickly. This, in turn, increases the risk of re-contamination of the product, with the possible result of impairing the next processing step.
Vacuum suction without compressed air in short cycles
With its innovative EcoCVac pre-cleaning and intermediate cleaning system, Dürr Ecoclean of Monschau/Germany has overcome these drawbacks. The equipment relies on the newly developed vacuum suction technology. This ensures that contaminants will be removed not just from the part but also from the work chamber within a mere 1.5 to 3 seconds of process time.
The EcoCVac system comprises a pressure vessel in which a vacuum is maintained permanently. This vessel is connected by a pipe to the vacuum chamber in which the part is placed. Once the chamber is closed, a powerful airflow is directed through it, thereby 'entraining' the chips sticking to the part and taking them into the vacuum vessel. A chip clean-out device integrated nearby separates chips and emulsion, allowing both to be discharged separately via a collecting bin and a flume, respectively.
More than 50 percent energy savings
In the development of the EcoCVac system, resource efficiency was a prime concern. As a result, the system affords a much-reduced energy consumption as compared to compressed-air type equipment. Assuming a compressed air consumption of 2.5 Nm3 per part at a price of 1.26 euro cents per Nm3, the cost of one compressed-air blowing cycle amounts to 3.15 euro cents per part. With the new vacuum dry cleaning process, an electric power input of 0.139 kWh per part is needed. At an estimated electricity price of 10.88 euro cents per kWh, power costs of 1.51 euro cents per part will thus be incurred. This is equal to a cost reduction by more than 50 percent.
Optimized process reliability and availability
In addition to the obvious cost benefits, the EcoCVac shines with its improved process reliability. As the chips are removed not only from the part but also from the work chamber, the risk of re-contamination is minimized. The chamber must hence be cleaned less often, and at a clearly reduced cost and effort. Moreover, unlike conventional compressed-air systems, there are no nozzles to be aligned relative to the part, e.g., during commissioning or after a collision. The system's availability rate is thus further improved. 
Photo: DE_EcoCVac_frontal
Dry cleaning without compressed air can yield energy savings of more than 50 percent in addition to process reliability gains.
Photo: DE_EcoCVac_Detail
The parts are cleaned in a vacuum chamber through which a powerful airflow is passed. This airflow not just reliably removes contaminants adhering to the part, but also conveys them out of the work chamber.
|
|
|
|
|
|
主站蜘蛛池模板：
亚洲伊人久久大香线蕉|
少妇人妻av|
97久久超碰国产精品2021|
午夜成人理论无码电影在线播放|
色婷婷亚洲精品天天综合|
亚洲国产色图|
中文字幕亚洲人妻一区|
99精品中文|
性无码一区二区三区在线观看
|
精品国产Ⅴ无码大片在线观看81|
亚洲国产精品日韩av专区|
国内少妇偷人精品视频|
国产在线视频精品视频|
亚洲春色AV无码专区在线播放|
亚洲精品2区3区|
xxxx丰满少妇高潮|
丰满少妇高潮在线观看|
热久久综合这里只有精品电影
|
国产精品综合一区二区三区|
亚洲色频|
国内精品久久人妻无码不卡|
克什克腾旗|
欧美日韩不卡中文字幕在线|
少妇高潮尖叫黑人激情在线|
亚洲性一交一乱一伦视频|
免费一级欧美在线大片|
亚洲精品日本久久一区二区三区|
大白屁股流白浆一区二区三区|
欧美性受xxxx白人性爽|
亚洲AV无码成人精品区|
久久久久香蕉国产线看观看伊
|
中文字幕在线制服丝袜|
日本高清中文字幕免费一区二区|
丰满少妇一区二区三区专区|
精品人妻少妇一区二区三区18|
无码AV无码免费一区二区|
99久久精品国产毛片|
亚洲AⅤ波多系列中文字幕
|
亚洲三级视频|
开心五月婷婷激情综合|
国产成人精品一区二三区|
