|
Husky demonstrates range of innovative technologies for beverage packaging at NPE 2015
3/24/2015 |
|
|
including revolutionary self-cleaning mold technology for HyPET HPP5
BOLTON, Ontario - A one push-button mold cleaning in eight seconds instead of four hours, and ten times fewer cleaning interventions on a machine: Husky Injection Molding Systems today announced that at NPE 2015 (March 23 - 27, Orlando, Florida), it will provide live demonstrations of its revolutionary new self-cleaning mold technology for the HyPET® HPP5 preform manufacturing system, located at Booth #2117 in the West Hall. The new mold feature is part of the reduced maintenance package for the HyPET® HPP5 system and can extend cleaning and greasing requirements to approximately every 500,000 cycles. This represents a dramatic improvement over conventional technology in the industry.
"With cycle times getting faster, one could expect shorter maintenance intervals, more maintenance, and shorter mold life. Instead, HyPET® HPP5 overcomes the contradiction between cycle time and mold maintenance. Self-cleaning can eliminate up to 400 hours of maintenance time per year, which results in 5% more production time," said Nicolas Rivollet, Husky's Director of Business Development. Self-cleaning is a push-button that uses controlled flash of the tool to collect and remove dust built up in the vents. Completely automated, totally reliable, and consistent, self-cleaning does not require an operator to go inside the machine, and can be performed as often as needed as there is virtually zero time penalty on production.
The system at NPE will also be equipped with Husky's enhanced mold alignment technology that enables time to first refurbishment to be extended three times, while improving cycle times and part quality. Using six sensors to detect the position of the core plate with respect to the cavity plate, the HyPET® HPP5 mold alignment is a real-time, 3D measurement of the alignment displayed as constant feedback on the HMI. If misalignment occurs, the HMI provides specific instructions to resolve it. By simply turning a positioning device, the operator can re-align the tool with a resolution of a few microns, before the offset can cause excessive wear and impact quality.
Since its launch in late 2013, the HyPET® HPP5 system has had a very strong response from customers. In a short sixteen months the company has sold over seventy systems, with nearly forty installed and producing high quality preforms in customer facilities across the globe. The HyPET® HPP5 system at NPE will run a lightweight carbonated water preform application with a 10.89 gram part weight on a 96cav 50x140 pitch mold at a very aggressive 5.5 second cycle time. With this preform, HyPET® HPP5 is approximately 50% faster than the industry averages for the same type of applications.
"We continue to make significant investments to better understand the production issues our customers face so that we can offer new technologies to respond to these challenges. This is what we will demonstrate at NPE 2015," said Robert Domodossola, Vice President of Engineering and Business Development at Husky. "With our latest innovations we have paid particular attention to improving availability, as producing better parts at a lower cost for longer production intervals ensures customers can be more competitive."
Offering a whole new experience for Husky customers, the display at NPE will focus on providing visitors a more intimate opportunity to engage with Husky solutions and representatives. Holding the leading market share of high-volume PET manufacturing equipment, Husky offers a full suite of equipment and services for the plastics industry, and an unmatched level of global support in over 40 countries. Serving the industry for more than 35 years, Husky's preform injection molding workcells deliver the industry's lowest total production costs for the widest range of applications and capacity needs. Value-added services include preform development, factory planning, customer training, systems integration and complete asset management. |
|
Related Exhibition:
|
|
|
 |
|
NPE 2015
|
The International Plastics Showcase
3/23/2015 - 3/27/2015
Venue: Orange County Convention Center, Orlando FL, United States
|
|
|
|
|
|
|
主站蜘蛛池模板：
亚洲综合91社区精品福利|
国内精品伊人久久久久av|
久久国产精品老女人|
合阳县|
丁香婷婷激情综合俺也去|
精品中文人妻中文字幕|
无码视频一区二区三区在线观看|
国产精品精品久久99|
最新国产精品好看的精品|
国产激情A∨在线视频播放|
天天撸狠狠操|
中文字幕在线亚洲精品|
日本国产精品第一页久久|
疯狂的欧美乱大交|
国产欧美精品国产国产专区|
国产丝袜视频一区二区三区|
亚洲人成电影网站 久久影视|
777米奇色狠狠888俺也去乱|
国产精品自拍在线视频|
国产三级精品三级在专区|
中文字幕 制服 亚洲 另类|
亚洲一级一区二区三区|
欧美狠狠鲁|
亚洲av成人在线|
精品国产乱码久久久久久口爆|
丰满熟妇乱又伦在线无码视频
|
国产精品国产三级国产普通|
无码人妻斩一区二区三区
|
亚洲av中文aⅴ无码av不卡|
99麻豆久久精品一区二区|
canopen草棚类别9791怎么查|
亚洲精品成人在线2|
黄色三级a片|
国产一区二区日韩经典|
无码人妻精品一区二区三区温州|
欧美成人天堂|
欧美VA亚洲VA在线观看日本|
国产香蕉九九久久精品免费|
老妇xxxxx性开放|
日韩丨亚洲丨制服|痴汉|
亚洲欧美综合精品成|
